1. The steel ward door frame uses T1.6 thin and thick galvanized steel sheet metal to be bent. For example, the galvanized steel sheet metal is bent and formed, such as the flatness of the tube. In order to better reduce costs, many companies use general square steel tubes. To the door frame, with anti-corrosion painting .

2. To achieve the actual effect of preventing electromagnetic radiation, a good safety door must be filled with 99.99% pure lead plate, and the thickness of the lead plate must correspond to the matching dose.

3. The surface raw materials can be painted galvanized steel plate and stainless steel plate.

4. The interior is filled with fire-retardant and high-toughness honeycomb paper core board. Many factories are filled with foamed polyurethane or thermal insulation foam board. The compressive strength is low, which is very easy to hollow the wall, which is not conducive to the internal composition of the door leaf.

5. Ultra-wide width, 1700 wide sliding door does not need a figure curve in the middle, and the ultra-wide thick steel plate is customized.

6. The Bi-parting manual hospital door processing technology is also a key part. There is no beading around the door leaves, no welding points, no screws and bolts, and the control panel used special structure for occlusion, which is not only beautiful and will not be apart. The surface spray paint adopts the United States Brand automatic high-pressure electrostatic powder spraying machinery and equipment, the surface is leveled, smooth, and the paint has high compressive strength.