How to choose the automatic revolving door?

As a landmark of modern building entrances, the automatic revolving door integrates aesthetics, functionality and energy efficiency, becoming a symbol of high-end taste for commercial complexes, hotels, offices and airports.
Typically with 3/4 high-strength tempered glass wings rotating around a central shaft, it operates quietly and stably via an intelligent motor, with adjustable speed for different pedestrian flows. Its "always open, always closed" design acts as an airlock, isolating indoor and outdoor air, reducing AC energy consumption significantly. Equipped with advanced infrared sensors and safety buffers, it avoids collisions and has an emergency breakout function for safe evacuation. Widely used in high-traffic scenarios, it also features humanized auto-manual dual modes and customizable finishes, blending technology with aesthetics for a high-quality entrance solution.

TSTC, a professional revolving door manufacturer will tell you how to choose the revolving door, When selecting the details, it need to pay attention to these points .

To check the entrance area, if the entrance area is too wide or too high, our 2 wing automatic revolving door should be recommended, as this model possess the special structure that could bear the big door body with big weight, however, our 3/4 wing revolving door could not do it.

The rated voltage of our automatic doors is 220v, 50Hz, allowed voltage deviation about 10%, not to exceed this range.

In the process of using, we should pay attention to the wind speed, the wind speed can not be greater than 15m/s, our automatic revolving door can not be work normally with the wind speed higher than 15m/s. 

We should take effective security, cooling measures to ensure environmental temperature control between -10% to 40%°. Keep the area around automatic doors relative humidity below 75%, when the clean up, use a dry cloth to wipe the dust on both sides of the black sensor above the door, otherwise the door will reduce sensitivity to malfunction.

To more details, please check our sales manager or distributors in your area .