Hospital door with induction function is one type of doors used in hospitals and other unique places. Everyone who has been to the hospital clinic knows that the hospital door is often opened and closed every day because of the designated inspection, the regular inspection of hospital beds, the removal and replacement of wardrobe by medical staff and the access of patients and relatives. In order to better ensure the normal application of such doors for a long time, when purchasing medical induction doors, they should be consistent with the application natural environment of specific occasions and basically meet the regulations. Below, TSTC will take you to master the regulations of medical induction door.

When designing medical sensitive door products, two medium carbon steel galvanized square steels are formulated in the door leaf to avoid deformation of the door leaf due to frequent application. The hall door frame is supported by solid wood plate to avoid the deformation of the door frame endangering the application of the hall door. In order to better serve most doctors and patients, such commodities must also meet the following basic application regulations.

1. The immovable door and door cover must be fixed firmly

One of the characteristics of flush automatic doors is that they are often opened and closed. Medical sensor door manufacturers feel that if the door leaf and door frame are not firm enough, the application of the door will undoubtedly lead to problems. Therefore, the door made of high-quality raw materials has long considered this problem at the beginning of formulation. Two medium carbon steel rectangular square tubes are set inside the door leaf to avoid the expansion and contraction of the door leaf due to frequent application. The door frame can be generated by pressing 1.5mm each time to avoid the deformation of the door frame endangering the application of the door.

2. Waterproof and moisture-proof are necessary

The daily cleaning staff of the double open manual door is also a very good training for the medical door. If the door is not waterproof or moisture-proof, the light color door will swell, mildew and rot. Therefore, the equipment has excellent moisture resistance. The medical induction door has excellent waterproof characteristics at the position easy to absorb moisture. The two vertical poles of the door frame close to the floor have already passed the waterproof sealing, and the side plate of the door frame has become an ecological board, so that the medical sensing door can meet the climatic areas of different natural environments.

3. The impact resistance, scratch resistance and corrosion resistance are also necessary. 

The medical sensor door is difficult to avoid being collided by solid objects, such as hospital beds and disabled wheelchairs. Sometimes the impact is obvious. In addition, the hospital outpatient service is a congested public place, so it is inevitable to carry out violent applications, such as stepping and knocking on the door. The medical door is an indispensable commodity in the diagnosis and treatment site. The specific application site of medical induction door is the public place of medical institutions. For the unique site of medical institutions, there are many people and a sea of people, which is very easy to collide or pollute each other. Therefore, more attention should be paid to the selection of medical sensing door. If the door is not strong enough, the inner door can no longer be used.

4. The industrial purification door shall be disinfected with disinfectant every day

The industrial purification door shall be disinfected with disinfectant every day which will erode the door and easily fall off and fade. In addition, everyone's efforts are also eroded. There are many people in the hospital. Too much sweat will undoubtedly fade the outer door. If the indoor wooden door can not bear this daily erosion, the side door will look old and its ornamental performance will be reduced soon.

When selecting hospital door manufacturers, we must pay attention to whether their quality meets the standard and whether they can meet our own requirements. We must carefully distinguish it and check whether it is reliable, so that the manufacturer can guarantee the after-sales maintenance service.